Microwave Motion Sensor Led Panel Lights Semko Customized Family CLP-NGY-6060 manufacturer from China Naturelite Technologies Co.,Limited

Microwave Motion Sensor Led Panel Lights Semko Customized Family

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: CLP-NGY-6060

Microwave Motion Sensor LED panel light for 600*600mm Semko, EMC, CE, R & TTE,SAA approval

Microwave Motion Sensor LED panel light for 600*600mm Semko, EMC, CE, R & TTE,SAA approval

Features:

Product Name	Microwave Motion Sensor LED panel light	Power Factor(Typ.)	PF>0.9/230VAC,PF>0.9/277VAC at full load
Setup Time	500ms/230VAC at full load	Efficiency(Typ.)	85%
Voltage Range	180~295VAC	Inrush Current(Typ.)	COLD START 13A(twidth=50μs measured at 50% lpeak) at 230VAC
Frequency Range	47~63Hz	Safety Standards	ENEC EN61347-1,EN61347-2-13 independent,EN62384 approved

Specifications:

Model	CLP-NGY-6060
Operating voltage	220-240VAC
Switched power	Max.800W (capacitive)
Standby power	<1w
Warming-up time	20s
Detection area	10/50/75/100%,can be customized<20%
Hold time	5S/30S/1min/5min/10min/20min/30min, can be customized
Stand-by period	0s/10s/1min/5min/10min/30min/1h/+ ∞,can be customized
Stand-by dimming level	10%/20%/30%/50% can be customized
Daylight threshold	2~50lux daylight/twilight/darkness, can be customized
Sensor principle	Microwave motion detector
Microwave frequency	5.8GHz+/-75MHz
Microwave power	<0.2mw
Detection range	Max. (ØxH): 12m x 6m
Detection angle	30.~150.
Mounting height	Max. 6m
Operating temperature	-35~+70
IP rating	IP 20 IP65 (mounting in Hytronik special box)
Certificate	Semko, EMC, CE, R & TTE,SAA

Description:
Microwave Motion Sensor LED panel light
(1) 3 Steps Dimming Control (Corridor Function).
(2) 100H burn-in mode for fluorescent lamp.
(3) Steps Dimming Control (Corridor Function).
(4) Condominium Control Function.
(5) Ambient daylight threshold.
(6) Zero-cross relay operation.
(7) Loop-in and loop-out Microwave Motion Sensor led panel light .

MICROWAVE MOTION SENSOR DIMMABLE PANEL LIGHTS DESCRIPTION
Microwave Motion Sensor dimmable panel light is a kind of economical intelligent control lamp compared with other dimmable led panel light,You can use the panel lights to control the lamp brightness, etc.

Applications:
Sitting room;
Bedroom;
dining room;
corridor;
hotel,etc.
Suggestion: the installation height of droplight, the lowest point shall be not less than 2.2 meters off the ground.